Perri pump 200 Dial Doser 200 - Select Chemicals Limited

Go to content

Main menu:

Pools > Products
There are two PeriPump models - the 200 and the 800. 

 Each pump delivers about 200 and 800 mL/min respectively. Output will vary depending on liquid viscosity, lift height , length of suction, length of delivery line and back pressure. 
Every pump has the following features and benefits:
•Each pump is driven by a 24VDC brushless motor with an operating life of 5,000 hours.
• The pump bodies are moulded UV stabilized polycarbonate.
• The squeeze tubes are either PharMed or Tygon E-LFL - both long life chemically resistant materials.
• The bodies and tubes are very easy to remove / replace- no tools required.
• The boxes are IP67 rated corrosion free moulded ABS.
• The mounting system is a clever reverse upside down dovetail with a locking latch.
    it is very easy to mount the pump level in any substrate and keep it securely held in place yet it enables easy demounting.
• Every pump is supplied with every component needed to complete installation.


Require further information, product booklet or a safety data sheet.
e-mail or call us.

Very easy to use semi-automatic dosing to maintain the pH or chlorine level of a home pool:
Set the hourly dose amount.
Set the knob to the 12 o'clock position on the dial.
That’s it done!
You can turn the knob to increase or decrease the hourly dose by up to 50%.
You can set a Shock Dose and the pump will run for ten minutes and then revert to its normal programme.

Require further information, product booklet or a safety data sheet.
e-mail or call us.
 
 
 
 
Back to content | Back to main menu